Versatile Bank Fishing: 1 Bait 2 Ways for Largemouth Bass in Midwest Ponds

It’s early – but not too early – as you stand on the bank of the pond. To the novice, it looks empty. Calm. Still. Like nothing could possibly live beneath the dark surface… but you know better. The bright April days are slowly pushing the water past the chilly winter temps, and at 52°, things are waking up. The shoreline is riddled with the brittle brown stalks and faded reeds of last year’s growth. The chill in the air makes a jacket necessary, and as the wind picks up, it’s obvious why you’re the only one here. No matter – socializing isn’t on the agenda.

Even though the sun is up above the distant treeline, it’s fighting with the clouds, and your soggy fingers ache as you try to retie. A slight tug on a fresh Uni-Knot reassures you, confirming that the only connection between you and the fish is solid. It is – and so, the game resumes. Even though it’s early in the Midwest fishing season, it’s only a matter of time before your hard work pays off…

*tap*

The lightest tap. That’s all it takes to trigger years of vivid memories. In an instant, they all come flooding back – along with that familiar jolt of adrenaline that reminds you why we fish.

We’re off to the races…

Bank Fishing is a Special Thing

For many of us, this was where it all began.

For those of us in the Midwest, this is where each new season usually begins.

Small ponds start to warm a bit faster than lakes and canals here in Illinois (especially those with deep water) which means more bass activity, sooner. What’s a “small pond”? Anything 10 acres or less. If you have good shoreline access, these are also great places to knock the rust off. If your timing is right, you can get into a good mess of fish. Not to mention, fishing during the afternoon early in the season can be the most productive window – no need to get up before the sun – you’ll get icicles on your bits.

I tried several presentations this year: jerkbaits, chatterbaits, swimbaits, a bevy of ElaZtech plastics – but the Strike King Rage Craw turned out to be the most effective bait I threw, accounting for my first fish – along with the most fish – caught in April. Here’s a simple way to put it to work – and below, I’ll talk about pulling double duty with a single bait…

The Setup is Simple

Minimalist. A Berkley Lightning Rod. Pflueger President XT. Reaction Tackle X8 Braid to a Seaguar Premier fluoro leader (abrasion resistant) to a 3/0 Gamakatsu Alpha Nano or Reaction Tackle EWG and a 1/4 oz bullet weight. With this, you can quickly cover ground and fish a single Rage Craw two ways:

1. The Rage Craw Vertical Approach

Cast it out. Let it sink without jiggles. Calm yourself. Watch the line. If you see it jump, reel down and set the hook! Bass will often snag it on the drop, and if they don’t, the flappies will get their attention. They will likely inspect your offering, and if they’re going to bite, it will usually be within a few “hops.” Slowly lift your rod tip, then drop it, allowing the bait to fall straight back down. Keep watching the line. Go ahead and jiggle it now, if you must – or go nuts and drag it along slowly for a few feet before you reel in to make another cast.

2. The Rage Craw Horizontal Approach

If you need to move faster and cover more water, or if you see positive signs and notice that the bass are a bit more active than you expected – there’s no need to switch baits – cast your craw, let it sink to the depth you think the fish are at, and begin a slow, steady retrieve. The flappies will paddle behind the swimming bait, and you’ll quickly realize that swimming is not only passable… but very effective.

I’m Sure You’re Asking…

“AJ… why in the world did you pair a $100 reel with a $40 rod?!”

Great question – it has a lot to do with where I fish these days. Between the canals and the shallow lakes that have to be paddled, knocking around in the brush, hauling my plastic kayak into the thick of it just to get a crack at unbothered bass… I beat my gear up a lot and feel much better about accidentally snapping a $40 rod than a $200 rod. These things are workhorses; good enough for this kind of fishing.

So get out there and get your flappies goin’. Remember that largemouth key in on vibration & noise, while smallmouth bass key in on sight & scent. Keep these things in mind as you start your season – and you’ll be off to a great start.

Tight Lines & Godspeed, Patriots.

Subscribe

Join us as we continue to work on becoming better anglers – and better men.

Email

Subscribe

Thank You For Your Support

Your support directly funds the creation of weekly articles and videos that promote the development of better anglers and better men. Our country (and our kids) need both. Please share this site, and consider a monthly, weekly, or one-time donation. You are helping us make a difference!

Click to Donate